Double Groove Rail Cutter, Rail Cutting Machine, Guide Rail Cutter with Measuring Ruler for C45 Aluminum Alloy Rail Iron Rail (Double Groove)

This rail cutter not only cuts rails accurately, but it also comes with a quality ruler that makes it easier for you to make precise measurements and adjustments, ensuring accurate and stable rail cutting. It also has a user-friendly design that is easy to hold and use. If you need to cut guide rails, this rail cutter will be your good choice. How to Operate1. Rotate the ruler 90° to fix it, move the slider to the length to be cut, and turn the screw to fix it. 2. Insert the guide rail from the left side and push it to the fixed position of the slider. 3. Hold the handle and press down to cut the guide rail. 4. After the guide rail is cut, gently open the handle and check the length by measuring it with a ruler. SpecificationsModel: DC-35Material: 40CR, 45# Steel, A13 Steel , Iron Wire, RubberColor: BlueCutting Object: Aluminum Rail, Iron RailCutting Model: C 45Work Form: ManualCutting Width: 35-40cm/13.8-15.7inCutting Height: 7mm/0.3inCutting Thickness: ≤ 1mm/0.04inProduct Size:Handle Length: 64cm/25.inFolded Size: 65*8.5*13.5cm/25.6*3.3*5.3inUnfolding Size: 60*8.5*64cm/23.6*3.3*25.2in Gross Weight: 5.5kg/12.13lbsPackage Size: 70*17*10cm/27.6*6.7*3.94inPackage Included1*Rail Cutter1*English ManualAll Accessories for Installation NotesPlease allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

• 【Double Groove Rail Cutter】Unique double groove design. This two groove rail cutter can be used for cutting aluminum and iron din rail at the same time. The edges are finely polished and sharp enough to ensure a neat and burr-free incision.
• 【Smooth Rail Incision】Differ from band saws incision, sharp blade on this professional rail cutter can ensure the rail incisions neat & smooth. No complex operation. Just press the handle and cut the rails straight.
• 【Wide Cutting Range】Various sizes of steel & Aluminum DIN rails can be cut. With a cutting width of 13.8 to 15.7 inches and a cutting thickness of up to 1mm. You just need push the slider, set the cut length, insert the rails and get the rails you need right away.
• 【Labor-saving Handle】The handle uses the lever principle to save effort, and is equipped with non-slip rubber, so it has comfortable grip,and not easy to slip, is more safe in the use process.
• 【Practical Tool】The rail cutter provides a solution for power, construction, and completing other tedious cutting tasks, making work easier and more efficient.